Before you can edit or format your text, you need to highlight it. Highlighting your text is a way of telling Microsoft Word that you want to work with a certain piece of text. (Highlighting is also referred to as selecting.)
The simplest way of selecting text is to position the cursor where you want to start highlighting, click and hold the mouse button down and drag to the spot where you want to end the highlight. It is not essential that you drag across every single line that you want to highlight. It is sufficient to drag in a straight line from the start to the finish.
To deselect your text and remove any highlight, click somewhere in your text. You will then see the flashing cursor appear at the point where you click.
Another simple way of selecting text is to select the entire document. This is done via the "Select All" command. In Word 2007, the "Select All" command is found in the "Editing" section of the "Home" Tab. Click to display the "Select" menu and choose "Select All".
The "Select All" command is found in many programs and many environments. It can also be accessed from the keyboard using Control-A: just hold down the Control key while typing "A".
As well as highlighting characters by dragging across them, Word also allows you to select whole lines. To do this, position the cursor in the left margin and you'll notice that the cursor changes to an arrow pointing to the right. Once the cursor has changed, you can simply click to select a single line or click and drag to select several lines.
Another way of highlighting text is to click multiple times. To highlight a word, double click on the word; to highlight an entire paragraph, click three times on the paragraph.
It is also possible to select text via the keyboard. Most of these techniques involve using the Shift key. One popular technique is click followed by Shift-click. First, click to set the start of the area that needs to be selected; next hold down the Shift key and click to set the point where you want the selection to end. All the text between the two clicks will then be selected.
To highlight text without the mouse, use the cursor keys on your keyboard to position the cursor where you want your highlight to begin. Next, press Shift in conjunction with one of the cursor keys. To highlight character by character, press the right or left cursor key depending on the required direction. To highlight line by line press the down or up cursor key.
The Shift key can also be used in conjunction with the Control key. For example, if you hold down Control and Shift and press the right arrow, you will select word by word instead of character by character. Similarly, if you hold down Control and Shift and press the down arrow, you will select paragraph by paragraph.
The Home and End keys can also be used in this context. For example, if the cursor is positioned in the middle of a line, pressing Shift and Home will select from that position to the start of the line while pressing Shift and End will select from the cursor position to the end of the line. Holding down Control and Shift and pressing the right arrow will select from the cursor position to the start of the document. Control, Shift and End will select from the cursor position to the end of the document.
The simplest way of selecting text is to position the cursor where you want to start highlighting, click and hold the mouse button down and drag to the spot where you want to end the highlight. It is not essential that you drag across every single line that you want to highlight. It is sufficient to drag in a straight line from the start to the finish.
To deselect your text and remove any highlight, click somewhere in your text. You will then see the flashing cursor appear at the point where you click.
Another simple way of selecting text is to select the entire document. This is done via the "Select All" command. In Word 2007, the "Select All" command is found in the "Editing" section of the "Home" Tab. Click to display the "Select" menu and choose "Select All".
The "Select All" command is found in many programs and many environments. It can also be accessed from the keyboard using Control-A: just hold down the Control key while typing "A".
As well as highlighting characters by dragging across them, Word also allows you to select whole lines. To do this, position the cursor in the left margin and you'll notice that the cursor changes to an arrow pointing to the right. Once the cursor has changed, you can simply click to select a single line or click and drag to select several lines.
Another way of highlighting text is to click multiple times. To highlight a word, double click on the word; to highlight an entire paragraph, click three times on the paragraph.
It is also possible to select text via the keyboard. Most of these techniques involve using the Shift key. One popular technique is click followed by Shift-click. First, click to set the start of the area that needs to be selected; next hold down the Shift key and click to set the point where you want the selection to end. All the text between the two clicks will then be selected.
To highlight text without the mouse, use the cursor keys on your keyboard to position the cursor where you want your highlight to begin. Next, press Shift in conjunction with one of the cursor keys. To highlight character by character, press the right or left cursor key depending on the required direction. To highlight line by line press the down or up cursor key.
The Shift key can also be used in conjunction with the Control key. For example, if you hold down Control and Shift and press the right arrow, you will select word by word instead of character by character. Similarly, if you hold down Control and Shift and press the down arrow, you will select paragraph by paragraph.
The Home and End keys can also be used in this context. For example, if the cursor is positioned in the middle of a line, pressing Shift and Home will select from that position to the start of the line while pressing Shift and End will select from the cursor position to the end of the line. Holding down Control and Shift and pressing the right arrow will select from the cursor position to the start of the document. Control, Shift and End will select from the cursor position to the end of the document.
About the Author:
The The writer of this article is a trainer and developer with Macresource Computer Solutions, an independent computer training company offering Microsoft Word training courses in London and throughout the UK.
Posts
No comments:
Post a Comment